Aluminum alloy suspension clamp

Aluminum alloy suspension clamp is a kind of overhanging wire clamp, the wire clamp hull and pressure plate are cast by aluminum alloy, no hanging plate, the suspension point is located above the wire axis. The clamp has the characteristics of high strength, light weight, small magnetic loss, etc. It is suitable for the installation of small and medium section aluminum strand and steel core aluminum stran.

The main use of aluminum alloy suspension wire clamp is in the power, communication, railway and other industries, for fixing, connecting cables, telephone lines, rail and ground wires on the railway. As a lightweight but strong material, aluminum alloy has excellent mechanical properties and can withstand large tension and loads, while not easily deformed or broken. In addition, aluminum alloys also have good corrosion resistance and can be used in harsh environmental conditions for a long time without damage.

Before installing an aluminum alloy suspension clip, prepare the required tools and materials, such as the suspension clip body, bolts, nuts, washers, pliers, and wrenches. First determine the installation position, usually on the steel pipe or wire, more than 1200mm from the ground. Then drill a hole and install the bolt, slowly place the overhang clamp on the bolt, and secure it with pliers. Finally check whether the fixing is firm, no loosening or tilt.

The advantages of aluminum alloy suspension clamp include easy installation, easy maintenance, low cost and long service life. Compared with other materials, the price of aluminum alloy suspension clamp is relatively low, which can help users reduce project costs. At the same time, due to its simple structure, it does not need complex maintenance and maintenance, only regular inspection and cleaning can ensure its normal operation.

However, when using aluminum alloy overhang clamp, it is also necessary to pay attention to some matters, such as ensuring that the installation position is correct, fixed firmly, and the surface is not damaged or cracked. In addition, it is also necessary to check whether it meets the relevant standards and requirements before use to ensure its quality and safety.